All Projects Category, Mystery Projects

SHOT SKI

Introduction: Shot Ski

Picture of Shot Ski
Picture of Shot Ski
Picture of Shot Ski
Picture of Shot Ski

 

  • This is how I made my shot ski.
  • get the ski’s I used snow skies.
  • get brackets to hold shot glasses.
  • mount brackets for shot glass.
  • take shots in shot ski

I put these in there

 

Step 1: Tools and Supplies:

 
 
  • Tools and Supplies:
  • drill
  • phillips bit
  • pre hole drill bit
  • (4) brackets
  • 8 screws
  • skies
  • shot glasses (plastic)

 

Step 2: Making

 

Making a shot ski is pretty straight forward. The hardest part I found making mine was figure out how to mount the brackets that hold the shot glasses. I wanted to make my brackets so that the shot glasses can be removed from the brackets. I made my brackets to fit the plastic disposable shot glasses. The things I used as brackets I found at the hardware store in the electrical department. I’m not sure what there originally used for but they work perfect for this project. I pre-drilled holes in two of the corners then I screwed them down with screws mounting them to the ski. I measured an even distance in between the mounts.

Leave a Reply